순정이신 분들은 직접 사이트에서 펌웨어를 다운로드 후 업데이트를 하시면 됩니다.

http://ukdl.synology.com/download/DSM/5.1/5004/


아니면 간단하게 업데이트 메뉴에서도 클릭한번으로도 가능합니다.


XPenology 사용자라면 현재 성공했다는 글도 없고 부트로더에서도 베타버전만 지원 상태이므로 하루 정도 기다리면 될꺼같습니다.


자세한 업데이트 내용은 https://www.synology.com/ko-kr/dsm/5.1 직접 사이트 방문 하시면 됩니다.



업데이트 내용 (이번에 생긴 문제 해결 버전)

Version : 5.0-4528 Update 1

(2014/10/29)

Fixed Issues

  1. Fixed an issue that could cause DSM to become inaccessible after a system upgrade with a certain type of hard drive
  2. Fixed an issue where the name of shared folders could be incorrectly displayed, making data inaccessible when connecting via WebDAV protocol

4528 유저들은 그냥 업데이트만 눌려도 됩니다.



일단 업데이트 내용은 보안 취약점 패치이므로 하시는게 좋습니다.

Version : 5.0-4528

(2014/10/22)

What’s New

  1. This hotfix includes all bug fixes as well as security fixes in the previously released critical updates since DSM 5.0-4458.
  2. This hotfix will remove the current known malware on your Synology NAS.

Fixed Issues

  1. Fixed two Linux kernel vulnerabilities that could allow local users to cause a denial of service resulting in uncontrolled recursion or unkillable mount process (CVE-2014-5471 and CVE-2014-5472).
  2. Fixed one Linux kernel vulnerability that could allow local users to cause a denial of service or possibly gain privileges via a crafted application that triggers a zero count (CVE-2014-0205).
  3. Fixed one Linux kernel vulnerability that could allow man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate (CVE-2014-6657).
  4. Fixed one SNMP vulnerability where the improper validation of input could allow remote attackers to cause a denial of service (CVE-2014-2284).
  5. Implemented minor fixes related to the ShellShock Bash vulnerabilities previously addressed in DSM 4493-05 updates (Bash 4.2-51, 4.2-52, and 4.2-53).



기존 사용하시던 부트로더로는 업그레이드가 불가능하며 밑에 링크에서 자신에게 맞는 부트로더로 교체가 필요합니다.

DSM 5.0-4528 버전으로 밑에 링크에서 받으시면 됩니다. 

http://www.xpenology.nl/boot-images/


모든 데이터는 미리 백업 하신 후 업그레이드를 추천 해드립니다.

(오류가 떠서 막 여러가지 만지다보니 업데이트에 성공 했네요...)


업데이트 내용이 공개 안된 상태이며 업데이트 6은 생략된거 같습니다.

특이하게도 재부팅 없이 바로 업데이트된 후 새로고침으로 바로 이용이 가능합니다.

(업데이트 5 -> 7로 갈 때만 재부팅이 필요없음)


급하게 패치해서 그런가 업데이트 내용이 누락된 부분을 추가헀습니다.

꼭 업데이트 하셔야합니다.

Version : 5.0-4493 Update 7

(2014/09/29)

Fixed Issues

  1. Fixed a potential risk on Bash command shell (CVE-2014-6271 and CVE-2014-7169).



업데이트 내용


Version : 5.0-4493 Update 5

(2014/09/10)

Improvement

  1. Improve the stability of file copy to encrypted shared folders.

Fixed Issues

  1. Fixed a vulnerability that could allow servers to accept unauthorized access.



핵놀 유저들은 Nanoboot-5.0.3.1 DSM 5.0-4493 X64 기준으로


제어판 - 업데이트 및 복원 - 다운로드까지만 누른다.

SSH 접근해서 밑에껄 입력 해준다.

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 

mv /autoupd@te.info1 /autoupd@te.info


자세한 방법은 이전 글 참조

http://youtil.wo.tc/123


업데이트 내용

Version: 5.0-4493 Update 4

(2014/08/26)

Fixed Issues

  1. Upgraded OpenSSL to Version 1.0.1i to fix multiple security issues (CVE-2014-0224, CVE-2014-0221, CVE-2014-0195, CVE-2014-0198, CVE-2010-5298, and CVE-2014-3470).
  2. Implemented fixes for Kerberos 5 to address multiple security issues that allow remote attackers to cause a denial of service (CVE-2012-1013, CVE-2014-4341, CVE-2014-4342, CVE-2014-4344).
  3. Fixed an issue where files with ACL attributes could become inaccessible after being loaded in large batches when DiskStation acts as an NFS server.
  4. Fixed an issue where the restore might not be successful when containing multiple subfolders in Time Backup.
  5. Fixed an issue where DHCP server service does not map to the correct VLAN interface if the service started before VLAN is enabled.



핵놀 유저들은 Nanoboot-5.0.3.1 DSM 5.0-4493 X64 기준으로


제어판 - 업데이트 및 복원 - 다운로드까지만 누른다.

SSH 접근해서 밑에껄 입력 해준다.

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 

mv /autoupd@te.info1 /autoupd@te.info

 

지금 업데이트를 누른다.



그럼 알아서 진행 후 재시작이 된다.



 재붓하고도 접속이 안된다면 다시 재붓을 해주면 접속이된다!






업데이트 내용

Version: 5.0-4493 Update 3

(2014/07/24)

Improvements

  1. Improved the stability of volume expansion.

Fixed Issues

  1. Fixed two SAMBA vulnerabilities which allowed remote attackers to use the weaknesses to perform DoS attacks (CVE-2014-0244, CVE-2014-3493).
  2. Fixed an issue which prevented users from being able to log into DSM after completing QuickConnect Wizard after a fresh DSM installation.
  3. Fixed an issue causing slow response time in DSM on the early version of RS10613xs+ when too many concurrent connections were active.



핵놀 유저들은 Nanoboot-5.0.3.1 DSM 5.0-4493 X64 기준으로


제어판 - 업데이트 및 복원 - 다운로드까지만 누룬다.

SSH 접근해서

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 

mv /autoupd@te.info1 /autoupd@te.info

라고 입력 후 업데이트를 누른다.


그럼 끝!



Windows Server 2012 R2 Hyper-V에다가 XPEnology 설치하기 - 준비편에서 이어지는 글입니다.


Hyper-V를 실행 그리고 새로 만들기 - 가상 컴퓨터를 누른다.


원하는 이름과 경로를 설정


1세대로 설정


메모리는 개인적으로 써 봤을 때 1GB 만으로도 충분했으나 부족할꺼 같은 사람들은 2GB로 할당해도된다.


네트워킹 구성은 임의적으로 이름을 저렇게 설정한건데 대부분 고를 수 있는 어댑터가 한개일꺼고 그걸 그냥 추가해주면된다.


여기서 약간 중요한데 준비편에서 미리 만들어둔 부트로더 VHD 파일을 백업을 꼭! 해준다.

(DSM 설치시 포맷 영향으로 부트로더가 날라가는 현상 덕분에 백업한걸로 교체가 필요하다)

백업을 했다면 이제 만든 부트로더 VHD 파일을 연결해준다.


이제 마침을 누르면 준비는 거의 끝난다.


이제 다시 Hyper-V 설정창에서 몇가지를 더 손봐야한다.


프로세스를 자신이 쓰는 PC 사양에 맞게 바꿔준다.

HP N54L 사용자들은 2개를 추천한다.


IDE 컨트롤러 1로 가서 제거 버튼을 누른다.


SCSI 컨트롤러로 가서 VHD 생성 후 연결을 해줘야한다.

마침을 누르고 적용을하면 끗


이제 부팅을하고 기다리면 스샷처럼 IP가 보일텐데 이제 브라우저로 접속하면 설치 페이지가 나타난다!


할당 받은 사설 IP:5000로 접속


최신 DSM 다운로드 및 설치(권장)


비밀번호 입력 후 지금 설치


확인을 누른다.


설치가 끝난 후 아마 이렇게 뜨면서 부팅이 안될텐데 준비편에서 만든 부팅용 부트로더 VHD 파일을 지우고 백업했던 파일로 교체해준다.


그러면 다시 부팅이 된 후 설치가 완료 되었다고 나오는데 대충 넘기고 로그인 후 제어판에 가서 업데이트를하면 한방에 문제 없이 업데이트가 된다!


사실 새벽 3시 쯤이라서 마무리를 대충하긴 했는데 대부분 아무 문제 없이 설치를 할꺼라고 믿는다.

이제 핵놀로지를 이용해서 하고 싶은 일을 하면 끗!

시작하기 전에...

HP MicroServer N54L 구입자들을 위한 글이긴 한데 다른 PC라도 이 방법대로 설치가 가능하니 참조하셔도됩니다.

PG님 블로그에 있는 글을 어느정도 수정해서 쓴 글이므로 자세한 정보는 직접 가서 보는것도 좋습니다.

아마 일부 글은 PG님 블로그 링크를 걸어서 넘어갈 예정입니다.

Windows Server 및 Hyper-V 설치는 알아서 하세요!


XPENOLOGY를 HYPER-V에 설치하기 A-Z 1.준비편

http://blog.mystor.net/archives/540

XPENOLOGY를 HYPER-V에 설치하기 A-Z 2.설치편

http://blog.mystor.net/archives/547

XPENOLOGY를 HYPER-V에 설치하기 A-Z 3.DSM 업데이트편

http://blog.mystor.net/archives/574

----------------------------------------------------------------------------------------------------------

일단 Synology NAS 제품이 아닌 다른 기기에 Synology[각주:1]를 설치하기 위해서는 해킨처럼 부트로더가 필요합니다.

현재 나와있는 부트로더는 두가지인데 - Nanoboot, Gnoboot

이 글에서는 현재 DSM 5.0-4493 Update 2까지 한방에 업데이트가 가능한 Nanoboot 설치를 하도록 하겠습니다.


먼저 사이트로 가서 Nanoboot-5.0.3.1 DSM 5.0-4493 X64 img 이미지를 받습니다.

http://www.xpenology.nl/boot-images/


그 다음에는 img 이미지를 수정에 필요한 winimage 프로그램을 받습니다.

http://www.winimage.com/download.htm


winimage 실행 후 img 파일을 열어보시면 밑에 스샷처럼 나옵니다.


boot\grub 이동 후 보시면 여러개 파일이 있는데 스샷처럼 저 파일 3개를 꺼내옵니다. (드래그하면됨)


menu_debug.lst, menu_install.lst, menu_nano.lst 파일을 모두 열어서 sn=XXXXXXXXX 어쩌고 적힌걸 모두

sn=8CKIN00001 <- 이걸로 바꿔줍니다.

그리고 다시 드래그해서 이번에는 반대로 덮어씌우기를 하시고 저장을 누르시면 끝납니다.


이제 img 파일을 VHD 파일로 변환을 해줘야하는데 PG님 블로그 글을 참조하면 됩니다.

IMG를 VHD로 변환하기 포스트 링크


Windows Server 2012 R2 Hyper-V에다가 XPEnology 설치하기 - 설치 & 업데이트편

  1. 핵놀로지 (XPEnology) [본문으로]

+ Recent posts